Recent Posts

Pages: [1] 2 3 ... 10
1
Seats & Harnesses / Re: Corbeau clubsports
« Last post by bishop on May 07, 2017, 06:54:47 PM »
I have one of these seats, i ended up just bending 2 strips on flat bar and mounted the seat directly.  Less weight and lower centre of gravity i thought
2
Suspension & Geometry / Re: EP3 Track Width
« Last post by two.colours on March 26, 2017, 06:01:31 PM »
That never even crossed my mind! Thanks for your help!
3
Suspension & Geometry / Re: EP3 Track Width
« Last post by crx-challenge on March 26, 2017, 08:59:49 AM »
Send a tape measure through the bottom spokes of the wheels, under the car and measure them exactly from rim lip to lip. Get someone to hold the other end for accuracy of course.
4
Suspension & Geometry / EP3 Track Width
« Last post by two.colours on March 25, 2017, 11:04:23 PM »
Hi All, I'm looking to set my car up a bit better for track and thought I'd give it a go myself with the 'string alignment' method. I need to find out if there is a difference in track width front to back on the EP3, does anyone know? Google comes up with some conflicting results from no difference to +18mm at the rear.

Cheers
5
Suspension & Geometry / EP3 Track Setup
« Last post by Collister on March 10, 2017, 09:08:52 AM »
Hi Guys,
I'm looking for advice on track setups the car handles reasonably well but needs a bit more time on setup I'm currently running a pretty neutral setup as the car was going to be used for hill climbs also. I am now looking to just use the car purely for track.
Current setup
1degree camber all round
.5toe rear (I will check)
superpro castor increase bushes
extended ball joints
HSD Coilovers
rack raiser
subframe locking collar kit
10mm front spacers
225/45/17 NS2R's

Ideally I'm now looking to get
Castor increase top mounts
Progress 24mm arb
shorter track rods
and run a more aggressive setup.

Is it worth looking to run DC5 bottom arms?

Anyone help?


6
Wheels, Tyres & Pressures / Re: Toyo Proxes R1R tyres x 4 - 235/40 ZR17 90W
« Last post by aluk49 on February 23, 2017, 11:16:34 AM »
On for 300 start
7
Wheels, Tyres & Pressures / Re: Toyo Proxes R1R tyres x 4 - 235/40 ZR17 90W
« Last post by nosman on February 23, 2017, 11:13:47 AM »
Price ?
8
Wheels, Tyres & Pressures / Toyo Proxes R1R tyres x 4 - 235/40 ZR17 90W
« Last post by aluk49 on February 23, 2017, 10:40:25 AM »
Not sure if these fit any hondas, but I have 4 nearly new, Only done 10 road miles!  Bought for track car, but found that they were too wide for body work. On a well known site, but if anyone is interested please contact me

Regards

Al
9
Suspension & Geometry / Re: EP3 Suspension Options
« Last post by MilanoChris on February 20, 2017, 10:21:39 AM »
Should look after them properly     :50: :50:

I look after them in the same way as I looked after D2 coilovers on my first DC5, Ohlins on the 2nd Evo & S2000 and Bilstein on the 1st and 2nd Evo and 2nd DC5, plus OEM on all the various other cars I've had (3 EP3's, two ATR's, a DC2 from memory).

The only suspension I've ever had issues with were TEIN and D2. Of course YMMV.
10
Suspension & Geometry / Re: EP3 Suspension Options
« Last post by Newton on February 18, 2017, 05:56:31 PM »
You will need camber bolts for the front and adj ones for the rear

did'nt need any thing on mine to correct steering arm angle its fine
Pages: [1] 2 3 ... 10